<div dir="ltr">Wrenchers,<div>What are you all using as strain reliefs on the ends of conduit runs that run between arrays on roof mounts? We have arrays on two roof sections with a piece of rigid conduit connecting the two,  and galvanized MIGB's (ground bushings maybe some people call them?) on each end of the pipe. It was just cited on an inspection that this was improper use of equipment because the galv MIGB's are not rated for outdoor use? Anyone have anything to back up the use of this method or have a preferred method for strain relief and bonding for this application? Thanks for any thoughts.</div><div>Adam</div><div><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Adam Katzman<br>Autonomous Energies<br>PO Box 1245</div><div dir="ltr">Kingston, NY 12402<br><a href="http://www.autonomousenergies.com" target="_blank">www.autonomousenergies.com</a><br>(518) 567-1468<br><br></div></div></div></div></div></div></div>
</div></div>