[RE-wrenches] AGS sensitive battery charger

boB at midnitesolar.com boB at midnitesolar.com
Thu Oct 15 16:28:39 PDT 2015


We are not really advocating doing this.  It can cause nightmares in 
service and support.

If one really knows what they are doing, it can be done (and has been 
done) but mere mortals should not
be attempting to do this.

I would get a real AC to DC charger.  If  IOTA isn't good enough, maybe 
Magnum's is
ready or did I hear that the big  "X" has had one or two of these for 
quite some time now ?

Power factor corrected even ?

boB


On 10/15/2015 4:20 PM, Roy Rakobitsch wrote:
>
> The midnite classic 250 can do this fine. Rectify the generator 110vac 
> to around 165vdc and feed into classic. Use Aux functions to start and 
> stop generator based on battery voltage or SOC %.
>
> Roy Rakobitsch
> NABCEP Certified Small Wind Installer®
> NABCEP Certified Solar PV Installer®
> Certified Advanced Tower Climbing, Safety & Rescue
> Wind/PV Design Engineer
> Windsine LLC
> 631-514-4166
> www.windsine.org <http://www.windsine.org>
>
> On Oct 15, 2015 6:15 PM, "Chris Daum" <chris at oasismontana.com 
> <mailto:chris at oasismontana.com>> wrote:
>
>     Dear people:
>     I'm looking for an easy solution for battery charging off a
>     generator, but trying to save the cost of a big inverter.  I have
>     a customer who needs to charge a 48V battery bank with a 30A
>     charger off of a generator--but I need it to sense when the
>     battery voltage is low, so that the "device" (charger) will
>     automatically turn on the (2-wire start) generator and charge the
>     batteries.  I am trying to avoid the cost of, say, a Magnum
>     4448PAE with its AGS module, and just get a voltage sensitive
>     battery charger.  Is this doable?  Any ideas?
>     THANKS.
>
>     Chris Daum
>     Oasis Montana Inc.
>     406-777-4309 <tel:406-777-4309>
>     406-777-0830 <tel:406-777-0830> fax
>     www.oasismontana.com <http://www.oasismontana.com>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20151015/dee5f35a/attachment-0002.html>


More information about the RE-wrenches mailing list