[RE-wrenches] 3" Pipe Fittings/Pinning

[RE Ellison]

If you know somebody with a well drilling rig and a sense of humor pound a few 6 inch holes in the correct places set the pipe in Cross drilled with rebar in it and set the posts in concrete 

A big core drill might work also The 6 inch holes give you room to move things around to line them up correctly

I have one up here that I may have to do that on luckily I know a guy with a well drilling rig that I have done some favors for in the past


Bob Ellison

> On May 6, 2015, at 10:56 PM, AE Solar <autonomousenergies at gmail.com> wrote:
> 
> Does anyone have a products/methods they recommend for pinning 3” galve pipe to rock for a ground mount? I have a situation where I am pretty sure pinning will be our best option for some of the posts, but I’m not finding any kee klamp or similar fittings for 3” pipe.  Thanks for any thoughts/tips...
> 
> 
> 
> 
> 
> 
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G 
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150507/ffc90373/attachment-0002.html>