[RE-wrenches] 3" Pipe Fittings/Pinning
Dana
dana at solarwork.com
Thu May 7 06:43:30 PDT 2015
Welded foot plates with epoxy’d rock anchor bolts. Installed several in a high wind location of a canyon with basic overkill design ideas worked out with structural engineer years back and still stout.
We had a center pole with 3 outrigger legs. All 4 points rock drilled and epoxy anchored.
__________________________________________________________
Dana Orzel
Great Solar Works, Inc - NABCEP # 051112-136
dana at solarwork.com - www.solarwork.com
O - 970.626.5253 F - 970.626.4140 c - 208.721.7003
"Responsible Technologies for Responsible People since 1988"
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of AE Solar
Sent: Wednesday, May 06, 2015 8:57 PM
To: RE-wrenches
Subject: [RE-wrenches] 3" Pipe Fittings/Pinning
Does anyone have a products/methods they recommend for pinning 3” galve pipe to rock for a ground mount? I have a situation where I am pretty sure pinning will be our best option for some of the posts, but I’m not finding any kee klamp or similar fittings for 3” pipe. Thanks for any thoughts/tips...
Adam Katzman
Autonomous Energies
4872 State Route 9G
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150507/1459b603/attachment-0002.html>
More information about the RE-wrenches
mailing list