[RE-wrenches] wire sizing question

Jerry Shafer jerrysgarage01 at gmail.com
Fri Jan 2 14:38:32 PST 2015


Here here always include surge and voltage drop.
On Jan 2, 2015 12:10 PM, "Larry" <larry at starlightsolar.com> wrote:

> Jay,
>
> Divide inverter capacity by LVD then divide by full load efficiency.
> Example: 4000 Watt inverter shuts down at 42 volts, efficiency 85% =
> 4000/42 = 95A/.85 = 111 Amps. Then it depends on the insulation and
> conductor type and the corrections for ambient temp.
>
> How can you not consider voltage drop? This is important for the surge
> capability of inverters. If the battery-inverter run is long you could have
> significant voltage drop for a wire correctly rated for ampacity.
>
> Larry Crutcher
> Starlight Solar Power Systems
>
> On 1/1/15 7:23 PM, jay peltz wrote:
>
>> Happy new year all.
>>
>> I have a question on wire sizing for the following.
>>
>> 250 amp breaker, in a UL enclosure ( say midnite or outback etc)
>> conduit from battery box to enclosure
>>
>> I'm wondering how folks size this for ampacity not voltage drop.
>>
>> thanks
>>
>> jay
>>
>> peltz power
>>
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
>> org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150102/aff2d313/attachment-0002.html>


More information about the RE-wrenches mailing list