[RE-wrenches] Mounting height
peter.parrish at calsolareng.com
peter.parrish at calsolareng.com
Wed Oct 22 04:50:25 PDT 2014
As I remember, anything that needs to be inspected or manually operated needs to
be between 6'-6" and 2'-6".
- Peter
Peter T. Parrish, Ph.D.
SolarGnosis
> On October 22, 2014 at 12:28 AM Bob-O Schultze <bob-o at electronconnection.com>
> wrote:
>
> If it has some sort of switch or CB, the top of the handle cannot be higher
> than 6'7". As to the lower limit, I think that would depend on the location.
> In a garage, for example, the AHJ could make a case for 18" as that's where
> outlets generally live, but there is no lower limit that I'm aware of.
>
> On Oct 21, 2014, at 9:02 PM, frenergy wrote:
>
> Wrenches,
>
> I can't seem to find a reference to the heights allowable for
> inverter installs, either minimum or maximum (need both). For that matter, AC
> combiners, DC discos, any switchgear related to the inverter(s).
>
> Any help appreciated.
>
> Bill
> Feather River Solar Electric
> solar powered since 1982
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
> <mailto:RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> <http://www.re-wrenches.org/etiquette.htm>
>
>
> Check out or update participant bios:
> <http://www.members.re-wrenches.org/>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141022/e643d6a7/attachment-0002.html>
More information about the RE-wrenches
mailing list