[RE-wrenches] Mounting height

[Bob-O Schultze]

If it has some sort of switch or CB, the top of the handle cannot be higher than 6'7". As to the lower limit, I think that would depend on the location. In a garage, for example, the AHJ could make a case for 18" as that's where outlets generally live, but there is no lower limit that I'm aware of.

On Oct 21, 2014, at 9:02 PM, frenergy wrote:

Wrenches,
 
        I can't seem to find a reference to the heights allowable for inverter installs, either minimum or maximum (need both).  For that matter, AC combiners, DC discos, any switchgear related to the inverter(s).
 
        Any help appreciated.
 
Bill
Feather River Solar Electric
solar powered since 1982
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141021/3295424e/attachment-0002.html>