[RE-wrenches] Watsun problem

[Solar]

I called a few months ago and talked to them about it, I checked all the things they mentioned. The limit switch wasn't mentioned. 

Jesse

Sent from my iPad

> On Sep 22, 2014, at 12:07 PM, jay peltz <jay at asis.com> wrote:
> 
> Hi Jesse
> 
> I've always found the tech support at Array tech to be really good
> I'd call them. 
> 
> Jay
> 
> Peltz power
> 
> 
> 
> 
>> On Sep 22, 2014, at 9:30 AM, Solar <dahlsolar at gmail.com> wrote:
>> 
>> Hello,
>> 
>> I am having an issue with a Watsun dual axis tracker. It is a 24VDC model, run of a battery bank that is charged through an outback inverters connection to the grid. So the battery voltage is always at 24V. The tracker will run fine for a couple days then it will get stuck in the east facing direction. I can make it track by switching the control box to "Manual Control Mode" and then moving the array in any direction for a second or two and then switching it back to "Automatic Control Mode". It will then track for a couple days and get stuck in the east direction again. 
>> 
>> Everything is greased regularly, and the voltage at the motors is always where it needs to be. I haven't noticed anything binding the tracker in the east direction and it seems like to sensor is fine because it tracks after I use the steps I described above to move it. 
>> 
>> Any thoughts?
>> 
>> Thanks as always,
>> 
>> Jesse  
>> 
>> Sent from my iPhone
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>