[RE-wrenches] Conduit supports on sloped composite shingle roofs

Solar dahlsolar at gmail.com
Mon Sep 22 16:41:25 PDT 2014


I always use the quickmount conduit flashing. It doesn't give a lot of room between the roof and raceway however.  Maybe the foam block supports typically used for raceways on flat rubber roofs?

Jesse 

Sent from my iPhone

> On Sep 22, 2014, at 4:43 PM, Chris Mason <cometenergysystems at gmail.com> wrote:
> 
> I'm curious what methods people are using to mount, flash and stand-off conduit from the comp. shingle roofs. We don't do a lot of shingle, mostly metal and concrete, so we are less that familiar with the options. We used SnapNRack flashed mounts for the rail system, but they need a rafter under them and the conduit run will not be above rafters.
> As it is very hot here, I want to get some air between the conduit and the roof.
> 
> -- 
> Chris Mason
> NABCEP Certified Solar PV Installer™
> Solar Design Engineer
> Generac Generators Industrial technician
> 
> www.cometsolar.com
> 264.235.5670
> 869.662.5670
> Skype: netconcepts
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140922/c8ca6603/attachment-0002.html>


More information about the RE-wrenches mailing list