[RE-wrenches] Pv wire

[Jason Szumlanski]

I use this site when I need a quick answer. Use RHH (covered) with one
conductor. You get the same answer.

http://www.electrician2.com/calculators/rf_calculator.html


Jason Szumlanski

​Fafco Solar​


On Thu, Jun 26, 2014 at 1:46 PM, Jason Szumlanski <jason at fafcosolar.com>
wrote:

> 0.0437435 per this attached spec sheet for 600V.
>
>
>  Jason Szumlanski
>
>
> On Thu, Jun 26, 2014 at 1:15 PM, Kirk <kirk at vtsolar.com> wrote:
>
>> Hi folks,
>> What is the proper approximate in2  area to use for #10 1kva/2kva  pv
>> wire for calculating conduit fill? I'm on a job site and don't have the
>> specs with me. Thanks.
>>
>> Kirk Herander
>> VSE
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140626/3820d2b9/attachment-0002.html>