[RE-wrenches] Pv wire

[Jason Szumlanski]

0.0437435 per this attached spec sheet for 600V.


Jason Szumlanski


On Thu, Jun 26, 2014 at 1:15 PM, Kirk <kirk at vtsolar.com> wrote:

> Hi folks,
> What is the proper approximate in2  area to use for #10 1kva/2kva  pv wire
> for calculating conduit fill? I'm on a job site and don't have the specs
> with me. Thanks.
>
> Kirk Herander
> VSE
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140626/397e2af0/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PV Wire Specs.pdf
Type: application/pdf
Size: 76374 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140626/397e2af0/attachment-0005.pdf>