[RE-wrenches] Lumos LSX250 modules

Chris Worcester chris at solarwindworks.com
Thu Jun 12 14:10:09 PDT 2014


Hi Bill,

Their new data sheet says +113 psf (their engineer put out a white sheet
saying they go to 150 psf) with the 6 mm glazing passing a 2" hail @ 72 mph
test. So they're beefy at 62# each.

 

Chris Worcester

Solar Wind Works

NABCEP Certified PV Installer

Office 530-582-4503

Cell 530-448-9692

Fax 530-582-4603

www.solarwindworks.com

chris at solarwindworks.com

 

From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
Behalf Of frenergy
Sent: Thursday, June 12, 2014 12:55 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Lumos LSX250 modules

 

Hey Chris,

 

        Sorry I can't help.  I'm sure you've already researched this and I
certainly see where you're coming from concerning the snow's effect on PV
frames but is too much strength lost being frameless?  Their data sheet says
the "static load is 50 psf, pretty low for snow country, on the other hand
would snow stay on the array?...it looks like an ice skating rink when
installed.  Maybe get a look-see at Intersolar. You've got me curious also.

 

        

 

Bill

 

Feather River Solar Electric 

Taylorsville

----- Original Message ----- 

From: Chris Worcester <mailto:chris at solarwindworks.com>  

To: 'RE-wrenches' <mailto:re-wrenches at lists.re-wrenches.org>  

Sent: Thursday, June 12, 2014 12:12 PM

Subject: [RE-wrenches] Lumos LSX250 modules

 

Hello Fellow Wrenches,

I'm interested in using the Lumos frameless LSX250 Series 250 watt modules
on an upcoming project. It's a 9:12 pitch in deep snow country, and I like
not having a frame to worry about getting scrubbed off.

I can see that wire management will be an issue upfront although their LSX
rail system does provide for some of that. We are coupling these with
Enphase M250 micro inverters, another wire management issue.  

We do have a set of 4 glass suction cups to be able to put a handle on them.
What else??

They say their Canadian, with an office in Boulder, Co.

I am wondering if there are others installing these and what experiences,
along with the pro's and con's are in advance, thanks!

 

Chris Worcester

Solar Wind Works

NABCEP Certified PV Installer

Office 530-582-4503

Cell 530-448-9692

Fax 530-582-4603

www.solarwindworks.com

chris at solarwindworks.com

 


  _____  


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140612/5f2477b5/attachment-0002.html>


More information about the RE-wrenches mailing list