[RE-wrenches] Shade for Inverters on a flat roof

[Jerry Shafer]

We have used vented cabinets with doors opening to the front. everything is
inside have had them inplace for several years
On Apr 30, 2014 1:39 AM, "Allen Frishman" <amfrish at aeonsolar.com> wrote:

> Benn,
> micro inverters are an option although there is no shade issues on this
> project so I would like to keep the inverter cost down.   What I mean by
> zero lot is that the building is connected to the buildings on both sides,
> there is no back yard space and the front wall is exposed to the street so
> hanging inverters on an outside wall is not an option.    Thanks for the
> feedback - I just might go with the micro inverters.
>
>
> *Al Frishman*
> AeonSolar
>
> *(917) 699-6641 <%28917%29%20699-6641> - cell*
> *(888) 460-2867 <%28888%29%20460-2867>*
> *www.aeonsolar.com <http://www.aeonsolar.com/>*
>
> On Apr 29, 2014, at 6:26 PM, Benn Kilburn wrote:
>
> Al,
> Not sure what you mean by "zero lot building"?
> Can you design/construct a ballasted "wall/structure" at the back of the
> array that could accommodate the inverters and load center on its
> 'out-of-the-sun' side.  It could be a covered/vented cabinet.
>   Are micro-inverters an option?  That would make it easier to
> design/construct such a wall.
>
> Benn
>
>
> On Tue, Apr 29, 2014 at 4:14 PM, Allen Frishman <amfrish at aeonsolar.com>wrote:
>
>> Hey Wrenchers,
>> I am looking for suggestions for building a shade structure on a flat
>> roof for inverters and load center.    There is no bulk heads on this flat
>> roof and it is a zero lot building so there is no exterior wall available
>> to hang the inverters.   No space inside the building either so the roof is
>> the only option.    Any suggestions?   I will be using a ballast racking
>> system so the array will not provide any shade.
>>
>> All ideas welcome and appreciated!
>>
>> *Al Frishman*
>> AeonSolar
>>
>> *(917) 699-6641 <%28917%29%20699-6641> - cell*
>> *(888) 460-2867 <%28888%29%20460-2867>*
>> *www.aeonsolar.com <http://www.aeonsolar.com/>*
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140430/cef421dc/attachment-0004.html>