[RE-wrenches] Shade for Inverters on a flat roof

Chris Mason cometenergysystems at gmail.com
Tue Apr 29 20:25:32 PDT 2014


I can show how we did the same thing on a flat roof using unistrut and
angle iron for 3 x SMA 20kw Tripowers and a 400A panel. All we had was a
$100 MIG welder. We put some roof steel sheet above the inverters.
I will have to look for photos.

Chris Mason
Comet Systems
Anguilla (264) 235-5670
St. Kitts  (869) 662-5670
skype netconcepts

NABCEP Certified Solar PV Installer™
Renewable Energy Systems professional
Generac Generators Factory technician
On Apr 29, 2014 6:11 PM, "Allen Frishman" <amfrish at aeonsolar.com> wrote:

> Hey Wrenchers,
> I am looking for suggestions for building a shade structure on a flat roof
> for inverters and load center.    There is no bulk heads on this flat roof
> and it is a zero lot building so there is no exterior wall available to
> hang the inverters.   No space inside the building either so the roof is
> the only option.    Any suggestions?   I will be using a ballast racking
> system so the array will not provide any shade.
>
> All ideas welcome and appreciated!
>
> *Al Frishman*
> AeonSolar
>
> *(917) 699-6641 <%28917%29%20699-6641> - cell*
> *(888) 460-2867 <%28888%29%20460-2867>*
> *www.aeonsolar.com <http://www.aeonsolar.com/>*
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140429/e69798cc/attachment-0003.html>


More information about the RE-wrenches mailing list