[RE-wrenches] Wrong title on my inquiry ... Charge Controller Question!

[RE Ellison]

Up to 960 A max charging current?

Was this thing published on April 1?

It must have been!

Bob Ellison


Bob Ellison

> On Apr 22, 2014, at 4:39 PM, "Larry Crutcher, Starlight Solar Power Systems" <larry at starlightsolar.com> wrote:
> 
> Hi Karl,
> 
> On their main page they claim charging "...with little or no electrolyte gassing." Gassing is a function of charge voltage. If you are charging deep cycle batteries properly, you will be gassing. After reading through the brochure, I'm not very impressed. Do yourself a favor and listen to what Ray said. Stick with proven, mainstream CC manufacturers. The fact that it is not an MPPT controller is a major drawback in any system over a few hundred Watts. 
> 
> Please share with us the operating and customization functions that you are looking for?
> 
> Thank you,
> 
> Larry Crutcher
> Starlight Solar Power Systems
> 
> 
> 
> 
> 
> 
> 
> On Apr 22, 2014, at 12:27 PM, Karl Jaeger <kjaeger at lightwavesolar.com> wrote:
> 
> 
> 
> From: Karl Jaeger 
> Sent: Tuesday, April 22, 2014 2:28 PM
> To: RE-wrenches at lists.re-wrenches.org
> Subject: RE: Fault Current
> 
> Greetings Wrenches,
> We’re considering a new charge controller for an upcoming project that offers a wide range of operation and customization. Has anyone had experience with this product? General specs and link below:
> 
> Sollatek - Solar Control Centre/ Solar Charge Controller
> 12/24/or 48V
> 10-100V Voltage Range
> 90-960A Max Charge Current
> http://www.sollatek.com/product/solarcontrolcentre/
> 
> Thank you in advance!
> Karl Jaeger
> LightWave Solar
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
>