[RE-wrenches] (RE-wrenches) 2x200 amp meter main panel question

[John Powell]

Thanks WIlliam,

Some of the old Milbank units are 320 amp rated socket.  The Murray 2 x 200's are 400 amp rated.

Best regards,

Abe
-- 
J. Abraham Powell
President
Solforce Systems, Inc.
224-G South Milpas Street
Santa Barbara, CA 93103
Phone: (805) 695-0015
Fax: (805) 565-1661
Cell:  (805) 895-2355
e-mail:  abe at solforce.com




On Jan 23, 2014, at 12:30 PM, William wrote:

> John: 
> 
> These panels are typically rated only 320A continuous duty, so I think your numbers would not compute.
> 
> William
> 
>> On Jan 23, 2014, at 11:31 AM, John Powell <abe at solforce.com> wrote:
>> 
>> Has anyone tried to connect one 40 amp inverter output circuit to each of the two breakers on a 2 x 200AMP single meter main panel in California?  
>> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140123/5f5ce574/attachment-0003.html>