[RE-wrenches] Square D Disconnects mounted on the slope of the roof.
William Dorsett
wmdorsett at sbcglobal.net
Sat Nov 9 05:38:13 PST 2013
How about Soladeck? They have the din rail for breakers or fuseholders and
are clearly for mounting at the roof slope. And they are UL approved.
Bill Dorsett
Sunwrights
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Mark
Drummond
Sent: Friday, November 08, 2013 12:59 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Square D Disconnects mounted on the slope of the
roof.
15 degrees off of vertical is my understanding for standard RBs. So no,
can't do that. Cheers good friend.
On Nov 7, 2013 2:42 PM, "Kirpal Khalsa" <solarworks at gmail.com> wrote:
Hi Folks!!!
Anyone aware of minimum slope requirements for Square D 321RB
disconnects....Can they be mounted on rails parallel to the slope of the
roof like Outback and Midnite solar combiner boxes(down to a 3/12 pitch)
I can't seem to find any notes stating the limitations in manufacturer
documentation...... They are NEMA 3 of course....
Thanks in advance for any direction you can provide....
Sunny Regards,
Kirpal Khalsa
NABCEP Certified PV Installation Professional
Renewable Energy Systems
www.oregonsolarworks.com
541-218-0201 m
541-592-3958 o
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131109/1914e092/attachment-0003.html>
More information about the RE-wrenches
mailing list