[RE-wrenches] Breaker Space Knockouts

Ray Walters ray at solarray.com
Wed Sep 25 11:50:48 PDT 2013


I just did one with 32 tooth/ in. jig saw, then filed it to clean the 
edges.  Came out decent, but took about 20 minutes.
I would tape over as well to avoid scratches.
I know they make punches, but they're stupid expensive, and easy to 
break the corners off.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 9/25/2013 12:06 PM, Drake wrote:
> Hello Wrenches,
>
> Has anyone come up with a good way to make clean breaker space 
> knockouts in an enclosure?
>
> Thanks,
>
> Drake
>
> Drake Chamberlin
> /Athens Electric LLC
> OH License 44810
> CO License 3773
> NABCEP Certified Solar PV Installer
> 740-448-7328
> /http://athens-electric.com/
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130925/63222d6f/attachment-0003.html>


More information about the RE-wrenches mailing list