[RE-wrenches] Breaker Space Knockouts

[James Jefferson Jarvis]

We have bezels laser cut out of 16 gauge steel with the breaker pattern.
Then we do a rough cut in the enclosure using a jig saw and rivet the bezel
on. Breakers attach directly to the bezel.

Alternatively, many enclosure supplies will punch whatever you want into an
enclosure. It gets expensive and takes a while, however.

-James Jefferson Jarvis
APRS World, LLC
http://www.aprsworld.com
+1-507-454-2727

(this message was sent from my cell phone ... my apologies for any spelling
errors)
On Sep 25, 2013 1:08 PM, "Drake" <drake.chamberlin at redwoodalliance.org>
wrote:

>  Hello Wrenches,
>
> Has anyone come up with a good way to make clean breaker space knockouts
> in an enclosure?
>
> Thanks,
>
> Drake
>
> Drake Chamberlin
> *Athens Electric LLC
> OH License 44810
> CO License 3773
> NABCEP Certified Solar PV Installer
> 740-448-7328
> *http://athens-electric.com/
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130925/5aa9e6de/attachment-0004.html>