[RE-wrenches] Breaker Space Knockouts

[Jesse Dahl]

I just did this for my fish house. I drilled holes first to eat up most of the spot I wanted to remove and then used a jig saw. I filed the area after I was done. I looks good. I put a very thin bead of grey caulk around the edge to hide the spot that I "colored outside the line".

Sent from my iPhone

On Sep 25, 2013, at 1:50 PM, Ray Walters <ray at solarray.com> wrote:

> I just did one with 32 tooth/ in. jig saw, then filed it to clean the edges.  Came out decent, but took about 20 minutes.
> I would tape over as well to avoid scratches.
> I know they make punches, but they're stupid expensive, and easy to break the corners off.
> R.Ray Walters
> CTO, Solarray, Inc
> Nabcep Certified PV Installer, 
> Licensed Master Electrician
> Solar Design Engineer
> 303 505-8760
> On 9/25/2013 12:06 PM, Drake wrote:
>> Hello Wrenches, 
>> 
>> Has anyone come up with a good way to make clean breaker space knockouts in an enclosure?
>> 
>> Thanks,
>> 
>> Drake 
>> 
>> Drake Chamberlin
>> Athens Electric LLC
>> OH License 44810
>> CO License 3773
>> NABCEP Certified Solar PV Installer
>> 740-448-7328
>> http://athens-electric.com/ 
>>  
>> 
>> 
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130925/b1751926/attachment-0003.html>