[RE-wrenches] Enphase Wire Management

[penobscotsolar at midmaine.com]

We use as clips specifically designed to hold Enphase trunk cable to SnapN
Rack rails. We buy them from ARE.

DARYL


> Heyco Sunbundler!
>
> Typos courtesy of my iPhone.
>
> On Apr 11, 2013, at 8:52 PM, Aaron Mandelkorn <reosolar at gmail.com> wrote:
>
>> Just wondering what people like to use for supporting the trunk cable
>> for the enphase 215 inverters.  WIth zipties going brittle after a
>> couple of years aluminum or steel options are what I am more interested
>> in.  I have seen some installs with steel zipties but the sharp edge on
>> them makes me wonder if there is a chance of them cutting into the
>> cable.   I have used 3/8" one hole conduit straps on each side of the
>> trunk cable connector and although this seems quite stout it gets
>> expensive on larger systems.  Any ideas about products out there for
>> supporting the trunk cable for the life of the system?
>>
>> Aaron Mandelkorn
>> NABCEP Certified PV Installer
>> Renewable Energy Outfitters
>> Box 65 Salida, CO. 81201
>> (970)596-3744
>> reosolar at gmail.com
>> www.reosolar.com
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>