[RE-wrenches] Enphase Wire Management

[Brian Mehalic]

Heyco Sunbundler!

Typos courtesy of my iPhone. 

On Apr 11, 2013, at 8:52 PM, Aaron Mandelkorn <reosolar at gmail.com> wrote:

> Just wondering what people like to use for supporting the trunk cable for the enphase 215 inverters.  WIth zipties going brittle after a couple of years aluminum or steel options are what I am more interested in.  I have seen some installs with steel zipties but the sharp edge on them makes me wonder if there is a chance of them cutting into the cable.   I have used 3/8" one hole conduit straps on each side of the trunk cable connector and although this seems quite stout it gets expensive on larger systems.  Any ideas about products out there for supporting the trunk cable for the life of the system?
>  
> Aaron Mandelkorn
> NABCEP Certified PV Installer
> Renewable Energy Outfitters
> Box 65 Salida, CO. 81201
> (970)596-3744
> reosolar at gmail.com
> www.reosolar.com
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130411/0f2d016a/attachment-0003.html>