[RE-wrenches] Enphase Wire Management

Jesse Dahl dahlsolar at gmail.com
Thu Apr 11 19:19:38 PDT 2013


I use the clips that come from Enphase.  They are quick to install, much faster than zip-ties. 

Jesse

Sent from my iPhone

On Apr 11, 2013, at 8:33 PM, penobscotsolar at midmaine.com wrote:

> We use as clips specifically designed to hold Enphase trunk cable to SnapN
> Rack rails. We buy them from ARE.
> 
> DARYL
> 
> 
>> Heyco Sunbundler!
>> 
>> Typos courtesy of my iPhone.
>> 
>> On Apr 11, 2013, at 8:52 PM, Aaron Mandelkorn <reosolar at gmail.com> wrote:
>> 
>>> Just wondering what people like to use for supporting the trunk cable
>>> for the enphase 215 inverters.  WIth zipties going brittle after a
>>> couple of years aluminum or steel options are what I am more interested
>>> in.  I have seen some installs with steel zipties but the sharp edge on
>>> them makes me wonder if there is a chance of them cutting into the
>>> cable.   I have used 3/8" one hole conduit straps on each side of the
>>> trunk cable connector and although this seems quite stout it gets
>>> expensive on larger systems.  Any ideas about products out there for
>>> supporting the trunk cable for the life of the system?
>>> 
>>> Aaron Mandelkorn
>>> NABCEP Certified PV Installer
>>> Renewable Energy Outfitters
>>> Box 65 Salida, CO. 81201
>>> (970)596-3744
>>> reosolar at gmail.com
>>> www.reosolar.com
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> List sponsored by Home Power magazine
>>> 
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>> 
>>> Change email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive:
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 



More information about the RE-wrenches mailing list