[RE-wrenches] Two Mates

[frenergy]

Bob-O, et al.

        Thanks for the help...I guess I always thoughts 2 Mates were do-able, now I see it's even labeled on the second port of a hub "2nd Mate".  But alas, from your feed back, I'll not be utilizing another Mate in this (or any) system.  Dang.

Bill 
Feather River Solar Electric


  ----- Original Message ----- 
  From: Dana 
  To: 'RE-wrenches' 
  Sent: Saturday, April 06, 2013 3:34 PM
  Subject: Re: [RE-wrenches] Two Mates


  Ditto the second port will not work according to a conversation with OB a while back.

   

  ____________________________________________________________________________

  Dana Orzel 

  Great Solar Works, Inc -  NABCEP # 051112-136

  dana at solarwork.com  - www.solarwork.com 

  O - 970.626.5253    F - 970.626.4140   C - 970.209.4076             

  "Responsible Technologies for Responsible People since 1988"  

   

   

  From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Bob-O Schultze
  Sent: Saturday, April 06, 2013 4:32 PM
  To: RE-wrenches
  Subject: Re: [RE-wrenches] Two Mates

   

  I don't know about the Mate3, but I could never get two Mates to work on a Hub-4 or Hub-10. Yes, there are two spaces for Mates on a Hub 10, but according to one of the techies I spoke to, it was a good idea that never happened.

  Bob-O

   

  On Apr 6, 2013, at 12:01 PM, frenergy wrote:





  Wrenches,

   

          I need a little Weekend Wrench assistance.  I can't find anything definitive in the Mate3 OM discussing how many Mates can be connected to a Radian.  I have a backhoe showing up Monday AM.  I am running power and cat5 for a Mate3 from a Radian to a location 300' away. 

   

  Two things: This is the max recommended for the hub-to-a-mate distance so I'm planning on pulling it in its own conduit, separate from the power (do other tricks come to mind to insure the signal makes it?), and

  Can I connect this Mate3 and keep the one at the Radian online?  Has anybody actually done this?

   

  Thanks, as always,

   

  Bill

  <FRS_working_logo.jpg>

  _______________________________________________
  List sponsored by Home Power magazine

  List Address: RE-wrenches at lists.re-wrenches.org

  Change email address & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org

   



------------------------------------------------------------------------------


  _______________________________________________
  List sponsored by Home Power magazine

  List Address: RE-wrenches at lists.re-wrenches.org

  Change email address & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130407/a801fc2f/attachment-0003.html>