[RE-wrenches] Two Mates
Bob-O Schultze
bob-o at electronconnection.com
Sat Apr 6 15:32:09 PDT 2013
I don't know about the Mate3, but I could never get two Mates to work on a Hub-4 or Hub-10. Yes, there are two spaces for Mates on a Hub 10, but according to one of the techies I spoke to, it was a good idea that never happened.
Bob-O
On Apr 6, 2013, at 12:01 PM, frenergy wrote:
Wrenches,
I need a little Weekend Wrench assistance. I can't find anything definitive in the Mate3 OM discussing how many Mates can be connected to a Radian. I have a backhoe showing up Monday AM. I am running power and cat5 for a Mate3 from a Radian to a location 300' away.
Two things: This is the max recommended for the hub-to-a-mate distance so I'm planning on pulling it in its own conduit, separate from the power (do other tricks come to mind to insure the signal makes it?), and
Can I connect this Mate3 and keep the one at the Radian online? Has anybody actually done this?
Thanks, as always,
Bill
<FRS_working_logo.jpg>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130406/8fccdce7/attachment-0003.html>
More information about the RE-wrenches
mailing list