[RE-wrenches] Battery Terminal Connections
William Miller
william at millersolar.com
Tue Apr 2 09:14:47 PDT 2013
John:
Of course. The protocol is copper eyelet in direct contact with the flag.
William
At 06:51 AM 4/1/2013, you wrote:
>William:
>
>I agree completely on all points.
>I have also seen many bolt heads migrate through the battery terminals
>and even split the terminal.
>Washers are cheap and effective prevention.
>
>Just one more thing
as an afterthought.
>Stainless is a lousy conductor NEVER put a stainless washers in the
>current path, i.e. not between the terminal and the cable ends.
>It might seem ok during basic testing but during a long high current
>charge or discharge the stainless washer will get very hot and bad things
>can happen.
>
>Best Regards,
>
>John Berdner
More information about the RE-wrenches
mailing list