[RE-wrenches] Outback Inverter Radio Interference

[frank -bz products]

Look into Amodon ferrite cores.


On 2/19/2013 1:30 PM, Vince McClellan wrote:
> Hello Wrenches
> I'm having an issue with a pair of Outback inverters producing 
> electromagnetic interference with the low band radios at a site we 
> installed recently. Other than a Faraday cage does anyone have any 
> methods of reducing the EMI from Outback inverters? I've been looking 
> in to ferrite cores but can't seem to find a source that lists what 
> the frequency is that is dissipated by the ferrite cores that I can 
> find online. I need the ferrite cores to be in the range of 250kHz to 
> 2MHz.
>
> Thanks,
>
> Vince McClellan
> Energy Design
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-- 
Frank Lewon
BZ Products INC.
8801 Gravois Rd.
St. Louis MO 63123 USA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130219/0afe69a7/attachment-0003.html>