[RE-wrenches] Corrugated roofing mounts

[August Goers]

Hi William,

You may have already seen this corrugated bracket from S-5:

http://www.s-5.com/clamps/index_2624.cfm

I believe it’s best to have the screws go into purlins. These are fairly
low cost; contact me offlist if you want me to send you distributor contact
info.

As far as figuring out what manufacturer/model of roof you have that can be
tough. Maybe find original building drawings or a sticker somewhere on the
underside? I’ve also found that the folks at S-5! are good at figuring out
manufacturers.

Good luck! -August



 *From:* William Miller <william at millersolar.com>
*Sent:* February 15, 2013 6:49 PM
*To:* RE-wrenches <re-wrenches at lists.re-wrenches.org>
*Subject:* [RE-wrenches] Corrugated roofing mounts

Friends:

I am trying to specify attachments for a corrugated roof.  This is the type
with the sine wave shape.

I want to try the DPW CMB product line.  I have been instructed to provide
measurements of the corrugation from peak to peak and also the height from
valley to peak.  The problem is that the measurements vary from point to
point on this roof.  In some places the peak to peak is 2.75" and in others
it is in the 2.6" range.  The height varies from 0.625 to 0.5 inches.

I have looked on-line and I find that a common dimension for roofing peak
to peak is 2.67".  There are products with height measurements of 0.5 and
0.875.

I have a few questions:

1. How do I figure out which roofing product I have?
2. Does it matter if the spacing varies from one location to the next?
3. Does anyone have experience with the CMB product.

Thanks in advance.

William Miller

Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985

______________________________**_________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.**org<RE-wrenches at lists.re-wrenches.org>

Options & settings:
http://lists.re-wrenches.org/**options.cgi/re-wrenches-re-**wrenches.org<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>

List-Archive: http://lists.re-wrenches.org/**pipermail/re-wrenches-re-**
wrenches.org<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>

List rules & etiquette:
www.re-wrenches.org/etiquette.**htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130216/ca70cf6f/attachment-0003.html>