[RE-wrenches] Corrugated roofing mounts

[Greg McPheeters]

The SnapNrack Corrugated Roof Block will work with that roof - I'm sure DPW has one that will work as well but can't say which size - 

http://www.snapnrack.com/metal-roof-mounts


Greg McPheeters  




________________________________
 From: William Miller <william at millersolar.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org> 
Sent: Friday, February 15, 2013 6:47 PM
Subject: [RE-wrenches] Corrugated roofing mounts
 
Friends:

I am trying to specify attachments for a corrugated roof.  This is the type with the sine wave shape.

I want to try the DPW CMB product line.  I have been instructed to provide measurements of the corrugation from peak to peak and also the height from valley to peak.  The problem is that the measurements vary from point to point on this roof.  In some places the peak to peak is 2.75" and in others it is in the 2.6" range.  The height varies from 0.625 to 0.5 inches.

I have looked on-line and I find that a common dimension for roofing peak to peak is 2.67".  There are products with height measurements of 0.5 and 0.875.

I have a few questions:

1. How do I figure out which roofing product I have?
2. Does it matter if the spacing varies from one location to the next?
3. Does anyone have experience with the CMB product.

Thanks in advance.

William Miller

Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130215/e886e84c/attachment-0004.html>