[RE-wrenches] Husqvarna 5500 and VFX3524 Compatibility

[Dan Fink]

We have run into many problems on very remote sites with various really
nice, small newer inverter/chargers not accepting waveforms from various
newer (inverter-based) generators. For example on one particular system
Honda 1000i works fine, Honda 2000i works fine, Honda 3000i and the charger
says "no." Plug a different Honda 3000i into the the same inverter/charger,
works fine. After sling-loading the Honda there by helicopter. Arrrrrgh!
Inverter makers have been very helpful but the settings just can't be
tweaked that far, RE Wrenches list gurus have been awesomely helpful, Honda
not so helpful but at least honest.

My service calls by helicopter this year will include an O-scope. I really
want to get to the bottom of the problem. It plagues us. I like Iota
 chargers more and more every summer.

-- 
Dan Fink,
Executive Director;
Otherpower
Buckville Energy Consulting
Buckville Publications LLC
NABCEP / IREC accredited Continuing Education Providers
970.672.4342 (voicemail)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130127/5f3b9309/attachment-0003.html>