[RE-wrenches] center feeding Enphase

[Jesse Dahl]

I find info about the AC soladeck in my distributors catalog, but I don't
find any information about it on Soladeck's website.




On Wed, Jan 2, 2013 at 7:18 PM, Jesse Dahl <dahlsolar at gmail.com> wrote:

> Hello,
>
> I am in the process of installing a Enphase system that requires center
> feeding the individual 15 modules circuits. I am wondering about wiring the
> J-Box.  I need to cut all of the boxes into the center of the runs of
> Engauge cable and maintain the 6" of free conductor.  To do this, I will
> need to pull the trunk cable towards the J-Box.  There are a few spots
> where doing this may pull the inverter connection points to far from the
> inverter.  It looks like like the spots where this will be a problem is
> where the circuit of modules is made up of modules from different
> North-South rows of racking. I took some rough measurements at the end of
> the day, but haven't really laid the cable out to check if it will really
> be problem.
>
> I'm sure this is common, and easily fixed, but a conformation from another
> installer would surely be welcome.
>
> Thanks,
>
> Jesse
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130102/9103ac0a/attachment-0003.html>