[RE-wrenches] center feeding Enphase

[Jason Szumlanski]

SolaDeck Models 0760-41AD and 0766-41AD are rated for up to 60A at 240Vac.

Give them a call - Steve is very helpful.

*Jason Szumlanski** *

*Fafco Solar
*

On Wed, Jan 2, 2013 at 11:57 PM, Jesse Dahl <dahlsolar at gmail.com> wrote:

> I find info about the AC soladeck in my distributors catalog, but I don't
> find any information about it on Soladeck's website.
>
>
>
>
> On Wed, Jan 2, 2013 at 7:18 PM, Jesse Dahl <dahlsolar at gmail.com> wrote:
>
>> Hello,
>>
>> I am in the process of installing a Enphase system that requires center
>> feeding the individual 15 modules circuits. I am wondering about wiring the
>> J-Box.  I need to cut all of the boxes into the center of the runs of
>> Engauge cable and maintain the 6" of free conductor.  To do this, I will
>> need to pull the trunk cable towards the J-Box.  There are a few spots
>> where doing this may pull the inverter connection points to far from the
>> inverter.  It looks like like the spots where this will be a problem is
>> where the circuit of modules is made up of modules from different
>> North-South rows of racking. I took some rough measurements at the end of
>> the day, but haven't really laid the cable out to check if it will really
>> be problem.
>>
>> I'm sure this is common, and easily fixed, but a conformation from
>> another installer would surely be welcome.
>>
>> Thanks,
>>
>> Jesse
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130103/3c8d4fae/attachment-0003.html>