[RE-wrenches] BP solar warranty contact etc.
Kirk Herander
kirk at vtsolar.com
Wed Nov 6 14:32:44 PST 2013
Hey folks,
I'm in the middle of re-commissioning properly(megger, curve tracer, etc.) a
45 kw system that I installed using BP SX170B panels in the Spring of 2006.
I have found 5 strings so far with 0 Voc, and 2 strings with a good Voc but
0 current when the inverter is operating. I have noticed small brown burn
marks on the face of a few panels where the junction box and/or bypass
diodes are (haven't looked at every panel yet).
I understand that these panels are now showing problems elsewhere in the
field. If one of you familiar could pass me the present BP warranty contact,
that would be great. Also any real-life experience / two-cents worth with
your dealings with BP and this problem would help also. Thanks.
Kirk Herander
VT Solar, LLC
dba Vermont Solar Engineering
NABCEPTM Certified Inaugural Certificant
NYSERDA-eligible Installer
VT RE Incentive Program Partner
802.863.1202
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131106/87508f59/attachment-0002.html>
More information about the RE-wrenches
mailing list