[RE-wrenches] S5! question
Glenn Burt
glenn.burt at glbcc.com
Mon Aug 20 10:27:19 PDT 2012
And if used with rails, helps with lowering module temperature (increasing
distance from roof) as well as discouraging rodent nesting (again the
further away from the roof deck the modules is, the less likely nesting is
to occur) in my experience.
-Glenn
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason
Szumlanski
Sent: Monday, August 20, 2012 11:27 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] S5! question
I agree - the regular S-5! clamps with L-Feet and rails adds a lot of
flexibility. Plus, it is compatible with microinverter installations.
Jason Szumlanski
Fafco Solar
On Mon, Aug 20, 2012 at 10:56 AM, Solarguy <ntrei at 1scom.net> wrote:
The S-5 Kit must be adjusted with the jam nuts potentially at every clamp
location to keep the modules from being forced to follow the roof contour.
We have always used L-feet and rails mounted to the standard S-5 clamps
since it creates a flat surface for the pv.
Jim Duncan
North Texas Renewable Energy Inc
www.ntrei.com <http://www.ntrei.com/>
NABCEP PV 031310-57
TECL-27398
ntrei at 1scom.net
817.917.0527
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Monday, August 20, 2012 9:17 AM
To: RE-wrenches
Subject: [RE-wrenches] S5! question
Hi All,
I'm doing a S5! PV kit install for the first time.
Any tips, advice ?
thanks,
jay
Peltz Power
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120820/e9eca2d3/attachment-0004.html>
More information about the RE-wrenches
mailing list