[RE-wrenches] Xantrex 600v charge controller

[maverick at mavericksolar.com]

We used a big ol' fat square D HU361RB for the disco. Too bad Xantrex did not have the forethought to build a SMA type fused segmenting disco. I even thought about building one or buying the SMA type. So budget that extra expense. Unfortunately, Xantrex also reserved the bottom of the chassis for air intake. 

Oh well, maybe someone is listening. 


Thank you,

Maverick


Maverick Brown
BSEET, NABCEP Certified Solar PV Installer ®
President & CEO
Maverick Solar Enterprises, Inc.
Office:     512-919-4493
Cell:        512-460-9825

Sent from my HondaJet!

On May 16, 2012, at 6:46 PM, jay peltz <jay at asis.com> wrote:

> Hi Maverick,
> 
> What did you use for a disco?
> 
> jay
> 
> Peltz Power
> On May 16, 2012, at 2:15 PM, Maverick Brown [Maverick Solar] wrote:
> 
>> We have installed about dozen in the last 9 months with no issues. They have great output and they talk to the XW Gateway, which is great. And you can / must program them via the SCP or the SCT. 
>> 
>> We use a string sizing tool Excel Spreadsheet first written by Richard Perez. We added a Temp Comp and series parallel user entry concept, etc. We usually string 12-14 each 60-cell polycrystalline panels or 10-11 each 72-cell monocrystalline panels. 
>> 
>> Thank you,
>> 
>> Maverick
>> 
>> 
>> Maverick Brown
>> BSEET, NABCEP Certified Solar PV Installer ®
>> President & CEO
>> Maverick Solar Enterprises, Inc.
>> Office:     512-919-4493
>> Cell:        512-460-9825
>> 
>> Sent from an iPhone. 
>> 
>> On May 16, 2012, at 2:09 PM, "lars Ortegren" <lars at cal-solar.com> wrote:
>> 
>>> Wrenches,
>>>                 I’m wondering if here is anybody out there that has installed any Xantrex 600v charge controllers out there. I looking at a job and thinking about replacing an MX-60 with a 700 foot pipe run to the array wired with #6 thhn!!!! My understanding is that the further away you get from the battery voltage, the greater the efficiency loss is within the unit. Outback gives the curve to show the loss of output at higher voltages, but searching Schneider’s site I can’t find anything close. It’s either going to be this, or tying a grid-tied inverter through the Outback output, but doing that would only get me single stage charging. Has anyone watched these controllers over time? Monitored its output?
>>> Thanks
>>>  
>>> Lars Ortegren
>>> Director of Operations
>>> California Solar Electric Company
>>> 10141 Evening Star Drive, Suite 6
>>> Grass Valley, CA 95945
>>> http://
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120516/89ffc50a/attachment-0004.html>