[RE-wrenches] MC4 Box connectors
jay peltz
jay at asis.com
Fri Mar 2 07:41:10 PST 2012
Hi William,
Was this cheaper than getting bulkhead fittings?
Very cool work around.
Jay
peltz power
On Mar 2, 2012, at 7:19 AM, William Miller wrote:
> Carl:
>
> That is the only type of connector we use. They are very solid and save one extra splice for each positive or negative lead. See: http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_wiring/_PV_wiring.html
>
> Just yesterday, working with a machinist, we figured out a simple procedure for modifying a 1/2" threaded plug to accept the threaded stud on the back of these connectors. Now we can thread these into 1/2" hubs on bell boxes. Very handy.
>
> We have only ordered them in quantities of 100.
>
> Good luck,
>
> William
>
>
More information about the RE-wrenches
mailing list