[RE-wrenches] MC4 Box connectors

[William Miller]

Carl:

That is the only type of connector we use.  They are very solid and save 
one extra splice for each positive or negative 
lead.  See: 
http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_wiring/_PV_wiring.html

Just yesterday, working with a machinist, we figured out a simple procedure 
for modifying a 1/2" threaded plug to accept the threaded stud on the back 
of these connectors.  Now we can thread these into 1/2" hubs on bell 
boxes.  Very handy.

We have only ordered them in quantities of 100.

Good luck,

William





At 12:14 PM 3/1/2012, you wrote:
>Hello Fellow Wrenches
>
>Is anyone using MC4 box connectors and if so do you have a source for
>these in small quantities.  I need 20 each male and female for an
>upcoming project.  MC Part number 32.0057P0001 for the Male and
>32.0056P0001 for the Female.
>
>With Regards
>Carl Adams
>SunRock Solar
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.5.455 / Virus Database: 271.1.1/4243 - Release Date: 02/29/12 
>20:36:00

Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985