[RE-wrenches] Magnum energy

Jason Szumlanski Jason at fafcosolar.com
Tue May 17 04:28:44 PDT 2011


Love the MS series inverters, but the last one I did is about 18 months
old. Rock solid for off-grid use. Get it mounted on a Midnite E-Panel to
simplify the install.

One note - the vent and fan holes are a little large, so make sure you
have adequate critter prevention.

Jason Szumlanski
Fafco Solar

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jesse
Dahl
Sent: Wednesday, May 18, 2011 12:06 AM
To: RE-wrenches
Subject: [RE-wrenches] Magnum energy


Hello all,

I posted a week ago about the awful off-grid install at a local hunting
shack and we are now moving on to the re-build portion of the job.  I've
been looking at the Magnum Energy MS series inverter/charger. I'd like
to also use Magnum mini panel for the geny, DC loads, and AC loads.  

This is a fairly small system with a about 150w of lighting, maybe a
vacuum and a toaster.  They also have a water pump.  I'd like any
advice/previous experience with this brand and type of install.  It
seems like a nice little system, much better than the RV inverter with
no OCP insight.  Does this seem like overkill? I'm sure they would love
to be able to power more AC loads if they could, so I don't think they
mind a little larger system(inverter watts)

Footnote, I used the Solmetric PV analyzer on the mis-matched module
array today 2-unisolar modules and 2 mitsubishi modules, all in
parallel.  We ended up with around 318W 16V and 20A at about 960 watts
per meter square.



Jesse


Thanks as always,


Jesse
Sent from my iPad!!!
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org




More information about the RE-wrenches mailing list