[RE-wrenches] Help me understand Gen vs XW
jay peltz
jay at asis.com
Fri Sep 9 07:36:55 PDT 2011
Hi William,
is the problem the actual connection or the AGS?
if its the actual connection, have you tried putting a load ( say 1000 watt heater) on the generator directly to stabilize the volt/hz from the genny?
if for a test if nothing else.
jay
peltz power
On Sep 8, 2011, at 9:40 PM, William Miller wrote:
> Friends:
>
> Working yesterday on a newer XW system with a new Kohler RES15 generator. This is the first time I have tested the inverter with this generator. The inverter would not maintain a transfer to the generator. After about an hour on the phone with tech support, the tech searched previous calls and announced that there is a known incompatibility between the Kohler RES15 and a certain version of the XW firmware. I was advised to upgrade the firmware.
>
> I wonder how this can be. Voltage and frequency even in the moment the inverter did try to connect are well within specifications. After some thought, all I can guess is that there might be some noise on the AC signal that the inverter might reject.
>
> Has anyone else experienced this? Any insight to be offered?
>
> Thanks in advance.
>
> William Miller
>
> William Miller
> Miller Solar
> Voice :805-438-5600
> email: william at millersolar.com
> http://millersolar.com
> License No. C-10-773985
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110909/dfc42939/attachment-0003.html>
More information about the RE-wrenches
mailing list