[RE-wrenches] Piping Reynolds Solar Hot Water Collectors
Brian Mehalic
brian at solarenergy.org
Thu Jun 23 04:44:27 PDT 2011
I believe the absorber plate and piping is aluminum, so a galvanic isolation fitting - compression if you can find it - would allow you to transition to copper pipe.
Sent from my iPhone.
On Jun 23, 2011, at 7:30 AM, Christopher Warfel <cwarfel at entech-engineering.com> wrote:
> I have come into possession of two, ~4 x12 Reynolds collectors and I need to pressure test them. It looks like the piping to and from the collectors was radiator hose. I have not been able to find any installation instructions on line for the way to pipe these and was wondering if anyone had a reference source. Thanks for any help. Chris
>
> --
>
> Christopher Warfel, P.E.
> ENTECH Engineering, Inc.
> Energy Utilization Experts
> (401)466-8978
>
> The information contained within this communication shall
> be considered confidential and shall not be retransmitted
> without knowledge of the sender. Please contact us if
> this email reached you in error. Thank you.
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list