[RE-wrenches] Piping Reynolds Solar Hot Water Collectors
conrad geyser
conradg at cape.com
Thu Jun 23 06:11:38 PDT 2011
We just use standard copper 5/8" compression fittings and have for decades
with no galvanic consequences. Sometimes tough to find a clean section of
tubing to go on. Also some limited success with a copper and aluminum
compatible solder....
Conrad
Cotuit Solar
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Brian
Mehalic
Sent: Thursday, June 23, 2011 7:44 AM
To: cwarfel at entech-engineering.com; RE-wrenches
Subject: Re: [RE-wrenches] Piping Reynolds Solar Hot Water Collectors
I believe the absorber plate and piping is aluminum, so a galvanic isolation
fitting - compression if you can find it - would allow you to transition to
copper pipe.
Sent from my iPhone.
On Jun 23, 2011, at 7:30 AM, Christopher Warfel
<cwarfel at entech-engineering.com> wrote:
> I have come into possession of two, ~4 x12 Reynolds collectors and I
> need to pressure test them. It looks like the piping to and from the
> collectors was radiator hose. I have not been able to find any
> installation instructions on line for the way to pipe these and was
> wondering if anyone had a reference source. Thanks for any help. Chris
>
> --
>
> Christopher Warfel, P.E.
> ENTECH Engineering, Inc.
> Energy Utilization Experts
> (401)466-8978
>
> The information contained within this communication shall be
> considered confidential and shall not be retransmitted without
> knowledge of the sender. Please contact us if this email reached you
> in error. Thank you.
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
More information about the RE-wrenches
mailing list