[RE-wrenches] SLDs with Mac
Keith Cronin
electrichi01 at yahoo.com
Sun Apr 10 12:37:42 PDT 2011
Max, et al.
I've also found parallels to be clunky a couple of years ago as well. Rumored that the new version is catching up to VMWare.
Even when VMWare first came out, it was a little slow to boot the OS- aka, Windows XP.
They've made some great strides since then, so perhaps consider an upgrade or switch to VMWare.
Aloha,
Keith
________________________________
From: Max Balchowsky <max at seesolar.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Sunday, April 10, 2011 8:42 AM
Subject: Re: [RE-wrenches] SLDs with Mac
I've got Parallels on my iMac also - yes it's too clunky to be useful. Draftsight is working out great for Cad Dwgs on the Mac, and, again, it's a free download...
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
________________________________
From: R Ray Walters <ray at solarray.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Sat, April 9, 2011 9:42:02 PM
Subject: Re: [RE-wrenches] SLDs with Mac
I've been running Parallels on a Mac for 3 years, and I just bought a PC for the PC stuff. I like my Mac, but after waiting 1/2 an hour to boot and update everything each time, Parallels is just really clunky.
I like Omnigraffle on my Mac. way better than simpler drawing programs, but not near as complicated as AutoCad.
I consider it optimal for one line diagrams and simple layout stuff. Its quick to use.
R. Walters
ray at solarray.com
Solar Engineer
On Apr 9, 2011, at 10:40 AM, Dave Click wrote:
> Nick, you can still use Visio/AutoCAD on the Mac if you install Parallels or VMWare, which allow you to run Windows programs. Either of those would run you about $80, which is cheaper than OmniGraffle. Each of these three software packages have trial versions so you can check them out before you commit.
>
> On 2011/4/8 7:55 PM, Nick
Soleil wrote:
>> Hello Mac Users:
>> I have been using Visio Professional for my Single Line Diagrams, but am
>> considering a change to Mac. Can I open or edit Visio diagrams with any
>> Mac applications? Probably not. What programs are available for
>> generating electrical diagrams? Have you used OmniGraffle? It seems
>> really user friendly.
>> What about AutoCAD for Mac?
>> Nick Soleil
>> 707-321-2937
>>
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options& settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules& etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110410/8fab6a2e/attachment-0003.html>
More information about the RE-wrenches
mailing list