[RE-wrenches] Solectria

Phil Theis phil at pennsun.com
Sat Jun 19 04:08:26 PDT 2010


Great info, thanks.
I really like the separate disconnect box on the IG+, I'll have to weigh 
the cost difference and availability.
Thanks again,
Phil Theis, also NABCEP
PennSun

EcoSolar - Eric Andrews wrote:
> We have two resi. units installed (one at my house) and they seem to be
> doing well w/ less than 1 yr.  They've made some needed upgrades for
> optional landing of a single larger pre-combined PV source circuit in
> addition to the individual 15amp series string fusing.  The power stage does
> not easily remove from the separate disconnect box like the fronius IG+ does
> if future service is required.
>
> Eric R. Andrews
> NABCEP Certified PV Installer
>
> Eco Solar, Inc.
> Electrical Contractor #C623
>
> www.ecosolarnow.com
>
> PO Box 5194
> Klamath Falls, OR 97601
> 541-281-8252 cell
> 541-273-3200 office
> mailto:eric at ecosolarnow.com
>
> Saving the World...  One Solar Panel at a Time!
>
>
> -----Original Message-----
> From: re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Phil Theis
> Sent: Friday, June 18, 2010 4:05 PM
> To: RE-wrenches
> Subject: [RE-wrenches] Solectria
>
> I've been using Fronius and SMA inverters to date, but have an interest 
> in using Solectria.
> May I get some feedback on experiences, good or bad?
> thanks,
> Phil
> PennSun Solar
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>   



More information about the RE-wrenches mailing list