[RE-wrenches] Solectria

[EcoSolar - Eric Andrews]

We have two resi. units installed (one at my house) and they seem to be
doing well w/ less than 1 yr.  They've made some needed upgrades for
optional landing of a single larger pre-combined PV source circuit in
addition to the individual 15amp series string fusing.  The power stage does
not easily remove from the separate disconnect box like the fronius IG+ does
if future service is required.

Eric R. Andrews
NABCEP Certified PV Installer

Eco Solar, Inc.
Electrical Contractor #C623

www.ecosolarnow.com

PO Box 5194
Klamath Falls, OR 97601
541-281-8252 cell
541-273-3200 office
mailto:eric at ecosolarnow.com

Saving the World...  One Solar Panel at a Time!


-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Phil Theis
Sent: Friday, June 18, 2010 4:05 PM
To: RE-wrenches
Subject: [RE-wrenches] Solectria

I've been using Fronius and SMA inverters to date, but have an interest 
in using Solectria.
May I get some feedback on experiences, good or bad?
thanks,
Phil
PennSun Solar
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org