[RE-wrenches] Sunteck SolarBlend

[William Dorsett]

Polycarbonate has a reputation for not holding up to UV.

Bill Dorsett 

SunwrightS

1715 Leavenworth

Manhattan, KS  66502

Home/Office 785/539=1956

Cell  785/564-2583

wmdorsett at sbcglobal.net



See Amory Lovins July 08 on Charlie Rose

http://www.charlierose.com/guests/amory-lovins

--- On Tue, 2/23/10, benn kilburn <benn at daystarsolar.ca> wrote:

From: benn kilburn <benn at daystarsolar.ca>
Subject: [RE-wrenches] Sunteck SolarBlend
To: "Wrenches" <re-wrenches at lists.re-wrenches.org>
Date: Tuesday, February 23, 2010, 5:57 PM




Hi All,
Just wondering if anyone out there has had any BIPV installs using Sunteck's SolarBlend modules?  I have an upcoming project that i will be using these Sunteck modules for and am looking for any issues (good/bad) that anyone else may have experienced with them and would be willing to share.  I am particularly curious if the polycarbonate frames have much affect on the install process, aside from not having to bond frames!I have worked with GE's Geko modules in the past and would like to know if the install process is quite similar.
Cheers,benn
DayStar Renewable Energy Inc. www.daystarsolar.cabenn at daystarsolar.ca780-906-7807 HAVE A SUNNY DAY



 		 	   		  
Not using Hotmail on your phone? Why not? Get it now. 

-----Inline Attachment Follows-----

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100224/0234544c/attachment-0003.html>