[RE-wrenches] Outback Mate remote programming

Darren darren at solarhacker.com
Mon Jan 4 17:40:13 PST 2010


Outback equipment store their own configuration settings, the MATE is just an input and display device. The MATE only can program the devices it's connected to.

Cheers

Darren

"Kirk Herander, VSE" <kirk at vtsolar.com> wrote:

>Hello Group,
>
> 
>
>I have a customer who wants to bring their Mate to my shop for programming.
>I have a GVFX3524 in my shop. His inverter is a VFX2812. Will I be able to
>plug his Mate into my inverter, program it for his inverter, and then have
>him take it home and plug it into his inverter and have the parameters
>transfer somehow to his inverter? I suspect the answer is no, but thought
>I'd check. I assume that the FX parameters are not stored in the Mate but in
>the FX itself, hence "you can't get there from here", as the old saying
>goes.
>
> 
>
>Kirk Herander
>
>Vermont Solar Engineering
>
>802.863.1202
>
>NABCEP(tm) Certified Solar Installer
>
>NYSERDA-eligible Installer
>
>VT Solar Incentive Program Partner
>
> 
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>


More information about the RE-wrenches mailing list