[RE-wrenches] trenching for solar thermal

Tump tump at hughes.net
Thu Dec 3 05:23:39 PST 2009


One can buy insulated line sets for direct burial from most of the outdoor
furnace retailers.
 
 
     
 
  

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Carl Hansen
Sent: Wednesday, December 02, 2009 4:30 PM
To: nponzio at buildingenergyus.com; RE-wrenches
Subject: Re: [RE-wrenches] trenching for solar thermal


Nik,
        We cover our insulated copper pipes with the 4" plastic corrugated
drain pipe available at Low's or Home Depot. After the pipe's are insulated
we run this drain pipe from one end to the other. It takes two people, we
try to avoid using 90 degree fittings instead two 45's or use flex copper.
Its hard to get the drain pipe around a 90 degree elbow.
 
  Carl
  Hansen&Sun Elect.
  (505) 470-0770

----- Original Message ----- 
From: Nicholas Ponzio <mailto:nponzio at buildingenergyus.com>  
To: RE-wrenches <mailto:re-wrenches at lists.re-wrenches.org>  
Sent: Wednesday, December 02, 2009 12:12 PM
Subject: [RE-wrenches] trenching for solar thermal

Esteemed Wrenches,

What is your preferred method for running thermal lines underground? We are
about to start a sizable ground-mount system and want to make sure we do
this right. (I've already seen it done the wrong way, the dirty way, and the
hard way.)

Thanks in advance for any feedback.

Best,
Nik






  _____  




_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20091203/7bd712bb/attachment-0004.html>


More information about the RE-wrenches mailing list