[RE-wrenches] Small Torque Wrench

[wlbryce at pineridgeproducts.com]

Hi Peter

I use a Deflecting Beam Torque Wrench from Warren & Brown. You can order
online direct.

http://www.warrenandbrown.com.au/PrecisionTools/ProductTree.aspx?From=Cat&ProductId=61

Cheers
Logan

> We have a great torque wrench for snugging down module clamps, Sharp SRS
> bolts, etc. What do folks use to insure that wire terminals are torqued to
> spec? We're talking 1.1 to 3.3 N-m (10-30 in-lbs). I'm imagining something
> compact like an over-sized screwdriver.
>
>
>
> - Peter
>
> Peter T. Parrish, President
> California Solar Engineering, Inc.
> 820 Cynthia Ave., Los Angeles, CA 90065
> Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
> CA Lic. 854779, NABCEP Cert. 031806-26
> peter.parrish at calsolareng.com
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>