[RE-wrenches] Small Torque Wrench

[Peter Parrish]

We have a great torque wrench for snugging down module clamps, Sharp SRS
bolts, etc. What do folks use to insure that wire terminals are torqued to
spec? We're talking 1.1 to 3.3 N-m (10-30 in-lbs). I'm imagining something
compact like an over-sized screwdriver. 

 

- Peter

Peter T. Parrish, President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parrish at calsolareng.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090309/49471fc0/attachment-0003.html>