[RE-wrenches] 690.31E (through a building)
William Miller
william at millersolar.com
Fri Dec 18 19:23:00 PST 2009
Mark:
If it were me, I'd put a disconnect prior to entry to the building. How
are you going to service the connections without a disconnecting means?
William Miller
At 03:24 PM 12/18/2009, you wrote:
>Hello there,
>Due to a lot of concrete and asphalt, we are forced to run our PV source
>circuits in through one exterior wall, through a crawl space and out
>through the opposite exterior wall to our inverter and disconnect. We
>will be using EMT and will not be making any stops while inside the
>building. We will however need to place a couple of pull-boxes due the
>various required bends in excess of 360*. Will we be required to place a
>DC disconnect at the first readily accessible point inside the building?
>
>Best regards,
>
>Mark Dickson,
>NABCEP Certified Solar PV Installer
>Oasis Montana Inc.
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 9.0.717 / Virus Database: 270.14.113/2573 - Release Date:
>12/17/09 23:35:00
Please note new e-mail address and domain:
William Miller
Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20091218/aadfd754/attachment-0003.html>
More information about the RE-wrenches
mailing list